☞PS4 data Sync cable: The first and most likely cause for the problem is that the PS button is not working properly or there’s an electrical circuit short going inside your PS4 controller. This is the most common cause of this issue. The other reason why your controller may not turn off could be because of a sort of malfunction in the battery that keeps it on Link to more comments/questions from this thread is below. -If possible, use voice or another controller (or button on console itself) to turn on the PS4, and power it down completely (not rest mode) -Unplug PS4 for 2-3 minutes. -Plug PS4 back in. -Attempt to turn on using the controller that wouldn't connect. Connect the controller to your device and launch the Remote Play application to check if it’s working properly. Method 4: Attempt to connect the PS5 controller to a different device. Connecting your PS5 controller to a different device can help determine if the issue lies with the controller itself or the device you are using for remote play. If the PS4 controller won’t turn on it means that it’s charging properly. So first, try to connect it to your PC or laptop to make sure that it’s charging. Sometimes the controllers face difficulty charging directly from the PS4. If it’s still not charging then it’s not your PS4 at fault. 3. Connect the Controller With a USB Cable This is how to allow your PS4 controller to connect to your PC.DS4 Link: 1xX44dH. To restart your PS4 in Safe Mode, you can follow these steps: Turn your PS4 off. Hold the power button for 10 seconds until you hear two beeps. Plug your PS4 controller into the console with a USB cord. Restart the controller by pressing the PS button. If it is an issue with the software, Safe Mode should fix the red light. First turn off your console. The Reset button is located in a tiny hole at the back of the controller near the L2 button. Using a paperclip, press and hold the Reset button for a few seconds. This should be enough to reset your controller. The next step is to once again pair your controller with your device. Simply connect the controller using Update the controller's firmware. You can do this by going to Settings > Devices > Bluetooth Devices > Wireless Controller > Update Controller Software . Reset your console. This can sometimes fix software problems. To do this, hold down the power button for about 7 seconds until the console turns off. Then release the key. Remove the power cable from the plug and the controller that would not connect from the console. Drop your PS4 for two to three minutes. Connect the power cable to the plug and the controller back to the console. Switch your PS4 on. Verify the controller to see if it works accurately now. Shut down your PS4 controller b y pressing and holding its power button for 5 seconds. Unplug all of the console’s cables for 5 minutes. Unplug the USB cable from the controller. Press and hold the console’s power button for 30 seconds to drain leftover energy. Plug all of the cables back. If the PS4 controller won’t turn on it means that it’s charging properly. So first, try to connect it to your PC or laptop to make sure that it’s charging. Sometimes the controllers face difficulty charging directly from the PS4. If it’s still not charging then it’s not your PS4 at fault. 3. Connect the Controller With a USB Cable

how to fix ps4 controller not connecting to ps4